-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
trouble shifting, getting into gear &stuck in gear
- Thread starter recordsj
- Start date
Share this page
bthompson
Jedi Warrior
Offline
Sorry; I meant the spring that holds the shifter tight against the retaining cup. If that spring is broken or slack (basically what happens when the spring breaks thru the plastic dish bushing), it'll bounce around a bit behind its retainer, the retainer will be loose, and pulling the lever into reverse is "too" easy. It'll slip between the gears with impunity, and feel loose and spongy, instead of 'snicking' into gear (well, as much as <span style="font-style: italic">any </span>Midget 'snicks' into gear
). It'll feel vaguely unconnected, and less stiff than it should. That's what I meant by 'slop.'
If, on the other hand, it feels tight, with a good strong pull up to get you into reverse, and a smooth discernable detent sliding into each forward gear; and still rocks around in 3rd like you described and tends to pop out of gear, then it's something in the internal shafts or linkages rather than the lever itself. And repair costs will go up exponentially.
Hope this helps. My 1500's shifter bushing broke a few months ago, so what you described rang a bell with what happened to me. Good luck!!
--Bill.
If, on the other hand, it feels tight, with a good strong pull up to get you into reverse, and a smooth discernable detent sliding into each forward gear; and still rocks around in 3rd like you described and tends to pop out of gear, then it's something in the internal shafts or linkages rather than the lever itself. And repair costs will go up exponentially.
Hope this helps. My 1500's shifter bushing broke a few months ago, so what you described rang a bell with what happened to me. Good luck!!
--Bill.