Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Offline
Hey guys,
This is my first post on this forum.
I tried to refill the front dampers on my '66 Sprite today but couldn't do the one on the left(driver's) side. I have the correct 1/4w wrench and can access the filler bolt head. It seems that the bolt won't back out enough because it runs into the side of the half-round cut out in the frame. I'm stumped on this one... Anybody else ever come across this issue?
I know that there will be posts questioning why I am trying to refill old dampers. For now, please just let me know if the issue I mentioned is unusual and if you have any suggestions. I'll probably end up buying new shocks from worldwide later this year if I can't get a little more life out of these...
Thanks
This is my first post on this forum.
I tried to refill the front dampers on my '66 Sprite today but couldn't do the one on the left(driver's) side. I have the correct 1/4w wrench and can access the filler bolt head. It seems that the bolt won't back out enough because it runs into the side of the half-round cut out in the frame. I'm stumped on this one... Anybody else ever come across this issue?
I know that there will be posts questioning why I am trying to refill old dampers. For now, please just let me know if the issue I mentioned is unusual and if you have any suggestions. I'll probably end up buying new shocks from worldwide later this year if I can't get a little more life out of these...
Thanks
