Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Offline
This is related to Hondo's issue but more general for all transmissions, both before and after Transmission Unit: CT9899.
According to my manual, before that baseline unit, the correct force for 3rd/4th was different than for Reverse. After that Unit Number, the correct pull force for Reverse and 3rd/4th was 26 to 28 lbs. I can't find what the correct force would have been for the setup for the older units, but I guess the answer is to pull the spring and ball and replace both with the plunger and short spring but I'm still curious.
According to my manual, before that baseline unit, the correct force for 3rd/4th was different than for Reverse. After that Unit Number, the correct pull force for Reverse and 3rd/4th was 26 to 28 lbs. I can't find what the correct force would have been for the setup for the older units, but I guess the answer is to pull the spring and ball and replace both with the plunger and short spring but I'm still curious.