but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Offline
Among other interesting cars in the lot, there's a Triumph 10 sedan for sale in Arizona (presumably that means pretty much rust-free)! Any takers? I'd love to, but there's that geography thing between AZ and upstate Eastern NY.... 
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Triumph 10 on BAT
- Thread starter Andrew Mace
- Start date
Share this page
Online
Did you see the length of that stick shift? Looks like you have to drive it from the back seat 
OP
Offline
[Disclaimer: I can't see the pictures here at work, but I am familiar with the cars, so....]
It's not really as bad as it looks. As the gentlemen at <span style="font-style: italic">Road & Track</span> used to say, the gearshift does pretty much "fall readily to hand"! It's a long, spindly lever to be sure, but it ultimately works directly on the selector forks in the gearbox. It does kinda have the same feel as the gear lever on an old 122 or early 140 Volvo...or an early 1950s Chevy truck, though!
I still have fond memories of my dad teaching me the "H" shift pattern, when I was about six years old, in the family's Triumph 10 sedan. He'd usually let me do the 3-4 shift on his signal!
It's not really as bad as it looks. As the gentlemen at <span style="font-style: italic">Road & Track</span> used to say, the gearshift does pretty much "fall readily to hand"! It's a long, spindly lever to be sure, but it ultimately works directly on the selector forks in the gearbox. It does kinda have the same feel as the gear lever on an old 122 or early 140 Volvo...or an early 1950s Chevy truck, though!
I still have fond memories of my dad teaching me the "H" shift pattern, when I was about six years old, in the family's Triumph 10 sedan. He'd usually let me do the 3-4 shift on his signal!