• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

MGB transmission seals worth replacing?

Share this page

WillR

WillR

Jedi Warrior
Country flag
Offline
The transmissions out new clutch is on the way and I have new seals on my shelf. The question is would I be opening things unnecessarily? I know I should expect a small amount of "territorial marking." Will I regret not putting new seals in now?
80xxx miles on the 78 B.

P.s. As an update most of the new wiring is in :encouragement:
 
With the amount of time & effort to do it later and since you have the seals in-hand, DO it now.
 
I'm with Doc on this one -- if the transmission is right there and ready for it, silly not to do the seals now.
 
X3 on replacing the seals! Seals sorta dry out over time and loose their flexibility, thus loosing their ability to seal out leaks. Deciding to replace them after everything is back in the car is a royal PITA! Do yourself a favor and do it now. JMHO. PJ
 
Agree as long as you are just talking about the rubber seals. No need to change paper gaskets except for the one behind the front cover. The side plate if it looks like its been weaping can be changed easy while its out. If you do not have a seal removal tool now is the time to purchase one. If the rear seal is original it will be bear to get out even with the tool.
 
This is usually what I use to pull seals, slap hammer and a shoe. PJ
attachment.php
 
Good to hear. Sometimes I second guess myself. I have played with a slide hammer but never seen a slap hammer. Thats no harber frieght tool or have I been walking by it all these times?
 
WillR said:
Good to hear. Sometimes I second guess myself. I have played with a slide hammer but never seen a slap hammer. Thats no harber frieght tool or have I been walking by it all these times?
Click to expand...

Will, I think this one came from Sears. PJ
 
Back
Top