• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR6 Transmission Plug

Share this page

Spock

Spock

Freshman Member
Country flag
Offline
I'm about to drain and re-fill the transmission in my TR6 (first time, wish me luck). Is there anything I can/should do to the drain plug to reduce leaking?

I'm not 100% sure it's actually leaking, but it's always wet. Will know for sure when I measure the volume of oil that comes out.

In any case, should I apply teflon tape? Other?
 
1st check you can undo the fill point !
Don’t drain unless it undoes.
The drain plug should be tapered this self sealing. But I use a smear of thread lock or general gasket sealant on the threads.
Trouble is it’s the lowest point we’re any leak will drip from. A lot of leaks stem from the top where the selector rods are.
 
Good advice on the fill point, thank you!

Anybody have a reference to a tapered plug that accepts an Allen key? My current plug is bulky and sticks out about 3/4". I will switch to a better plug if I can find one.
 
Got mine from McMaster Carr
Go there and search for this:

Solid with Magnet, Hex Drive, 3/8 NPTF Male​

 
Back
Top