TR4/4A Trailing Arm IRS

[HarryL]

Does anyone know the firm that produces the kit to tap in new
inserts for the hub carrier. They have the helicoils and all allowing you to
reuse the trailing arm after the original studs have been stripped.
Happy New Year Everyone
Harry

 

[alanjohnturner]

https://www.ebay.com/itm/Helicoil-T...958?pt=LH_DefaultDomain_0&hash=item5adfcff6de

https://www.ebay.com/itm/HELI-COIL-...950?pt=LH_DefaultDomain_0&hash=item4d162a8c36

I guessed the size, you need to check.

 

[HarryL]

This include the whole kit, helicoils, a plate to fasten down flat so the tap is done correctly,
plus the oversize studs. I just can't remember where I saw it.
Harry

 

[kayo]

This include the whole kit, helicoils, a plate to fasten down flat so the tap is done correctly,
plus the oversize studs. I just can't remember where I saw it.
Harry

This May be the site you are looking for: https://tr6.danielsonfamily.org/CVJInstall.htm

 

[HarryL]

Bingo !
Thanks Kevin

 

[justin_mercier]

You're looking for Rick Patton and Patton machine. https://www.pattonmachine.com/ Works great, used them on one set of trailing arms, thinking about doing the same to my 'spare' set.

 

[Marvin Gruber]

I have several good used ones if that doesn't work out for you.

Marv