• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Wedge TR8 O2 Sensors

Share this page

I've been told that Bosch 11051 is the version with the proper connector, Bosch 11027 is the same sensor that you need to crimp to the old connector.
 
Are the holes already there?
You need 3 wire then, not 2
I'm doing that to mine this year. There is a company that sells the connectors to go from 1 to 3
 
The bung holes are being welded in on Woody's headers and then powder coated.

The current set up is a single wire O2 sensor.

If I go heated I would hope to find an equivalent sensor....just three wires. Some creative wiring to find the proper hot wire to heat the the thing up and we should be good to go.

I trust a certain J Tencate has beaten this path already :smile:
 
I'm gonna use Bosch 13077 .
TPI Parts has the connectors.

The normal length is 15"+ I think
 
GBRandy said:
Darrell_Walker said:
I've been told that Bosch 11051 is the version with the proper connector, Bosch 11027 is the same sensor that you need to crimp to the old connector.
Click to expand...

Thanks....any idea on lead length on these? I cant find that.
Click to expand...

The 11051s I got from Amazon have 15" of wire, measuring from the end of the strain relief to the end of the connector.
 
Back
Top