Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
A. Salnick
Freshman Member
Offline
I am in the process of rebuilding my transmission for my tr6 and I have come across a few issues that give me a bit of concern. As a precaution, I bought new 1st, 2nd, and third gear BRASS (the ones I took out were brass as well) bushings from Moss. The first thing that I noticed is the ID of the top hat 2nd gear bushings does not appear to be large enough for my overdrive main shaft. The old one slips right on and off. The new one just won’t go all of the way on. I looked to see if there is a ridge or something, but it appears to be smooth.
As for the 1st and 3rd gear bushes, they appear somewhat short. When I was trying to measure the distance the new bushings stick beyond the gear, it was way under the 0.004 spec. The old ones are similar.
Has anyone else had problems like these when rebuilding a transmission? Any help would be greatly appreciated.
Thanks,
Adam
As for the 1st and 3rd gear bushes, they appear somewhat short. When I was trying to measure the distance the new bushings stick beyond the gear, it was way under the 0.004 spec. The old ones are similar.
Has anyone else had problems like these when rebuilding a transmission? Any help would be greatly appreciated.
Thanks,
Adam
