TR6 Tr6 soft top lnstall

[Wildhog]

Just bought a Robbins Canvas top . Old top is off, frame sanded and painted. Ready to go. My question is to start from the front or the back?

 

[Madflyer]

As I remember I started from the back make sure you are quite centered and fit some what lose it will shrink over time. You must know that already. ( note ) see You Tube the guy in Canada is very good. Madflyer

 

[Gliderman8]

Wildhog... Welcome to the British Car Forum.
You have posted your question in the wrong section. The "Forum Help" section is mainly for questions relating to navigating the forum, etc.
If you repost your question in the "Triumph" section of the forum you will get many more answers to help you out.
Go here:https://www.britishcarforum.com/bcf/forumdisplay.php?18-Triumph

 

[Basil]

Hi Wildhog,
The forum you posted in is for asking questions about how to navigate the forum. I'm moving this thread to our "Triumph" forum but will leave a pointer in the "Forum Help" form for a while.

If you are reading this, then you are now in the Triumph forum.

 

[glemon]

As for nearly everything else, there are very good articles on this subject on the Buckeye Triumph and Vintage Triumph Register website, I usually read both a couple times as for me at least some parts may make sense explained one way rather than another.

 

[rjc157]

Go to youtube Steve Denton just did an install as well as Elin from rusty beauties.