• Notice: If you're posting to get rid of the little man (Lucas), please post A NEW TOPIC with something meaningful. Tell us about yourself and your interest in British cars. You need not share anything too personal. NOTE: this New Member's Forum is only to introduce yourself. If you have specific questions about your little British car, please post those in the appropriate marque-related forum.
    Thanks and welcome to BCF!
    Basil
  • Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR6 Reverse gear Problem

Share this page

S

SPIKEYTR6

Freshman Member
Offline
I have a 1973 TR6 2.5PI. I have had it since 1979 and have had virtually no problems with it. I work in the Middle East, so my car is in the garage under wraps for quite a lot of the time. Anyway last month, I fired her up and was going up and down my drive.I put her in reverse and the gear stick just seem to jam in there. The car wouldn't move at all. I dropped the clutch a few times and tried to get it out of gear but no luck. After about 5 minutes of trying this it eventualy popped out ! It did it twice more that day. So decided to leave in my garage until I can find out what I need to do. It could be due to lack of use or a selector gone.

Any idea's,suggestions or remedy, will be much appreciated.
 
Welcome, Spikey.

Post your question over on the Triumph section, and I'm sure you'll get a response.

:cheers:
Mickey
 
Back
Top