Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Ready to install the 2 horns that came in a box when I purchased the car. Do the purple/yellow wires as well as the black(grnd) wires get connected to the different spades on the horns themselves? 74-tr6. Also, I replaced the steering wheel with a wood/leather one, adapter so on and so forth. This new wheel has (2) spades on the horn push part...one has a black wire attached which is just stripped and the adapter has a black wire with a push on spade connector. Any ideas?
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
TR6 tr6 horn wiring
- Thread starter Wike
- Start date
Share this page
alanjohnturner
Jedi Trainee
Offline
You got the right idea for the horn wires.
One wire from the wheel joins to the wire that goes down the loom to the horn-relay
The other got to be grounded via the spring contact and the brass disc.
If this is not enough info you will need to post some pics.
Al.
One wire from the wheel joins to the wire that goes down the loom to the horn-relay
The other got to be grounded via the spring contact and the brass disc.
If this is not enough info you will need to post some pics.
Al.