• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

TR6 TR6 Front Wiring harness on its way

Share this page

hondo402000

hondo402000

Darth Vader
Offline
well since I have the engine out of my 71- TR6 for rebuild and at the suggestion of members I have purchased a new front wiring harness to rewire the front of the car( I did the rear portion last fall during the paint job), and since it will be easier to paint the engine bay with the wires out, I ordered it yesterday plus dan masters book too. I am going back with the original harness but will put the relays back in for the head lights. My concern is I have an OD transmission going in and the OD harness but no reference as to how to run it since there was not one comming out. Also the hazard wires are all cut and never functioned, the pressure differential system was cut, and no bulbs in those lights either, the hazard switch is still in place. I hope this doesnt turn out to be a night mare

Hondo
 
Back
Top