• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR4A Wiring Suggestions

Share this page

B

briarpatch

Freshman Member
Offline
I am seeing light at the end of the tunnel in my total restoration of a '65 TR4A. All the body/paint work is complete and the engine has been totally rebuilt. My next task is installing a new Advance Auto Wire harness and the interior. Has anybody out there installed the AAW harness? Any tricks or tips in doing this installation? All the original wiring is still in the car which should make it easier. I take it that pulling the dash out will make this easier. Let me know what you think.

Also, is it worth the effort to install an electric fan? It gets to a 100 degrees F up here in the summer. Any recommendations on which fan to use?

Thanks for any information you may provide. I am new to the Triumph TR4A world so this has been a real adventure. Thanks, Grant.
 
Back
Top