Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I have been given an otherwise good Girling brake caliper(needs new seals) that has been separated into it's two halves. I understand that Moss says they shouldn't be separated because the bolt torque values are unknown and yet they appear to sell the little O ring seal that lives in there? Anyone taken one of these calipers apart successfully ,bolted it back together and knows the torque values?
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
TR4/4A TR4A Girling Brake Caliper Taken Apart?
- Thread starter karls59tr
- Start date
Share this page
Marvin Gruber
Yoda
Offline
Karl
Have disassembled several calipers to assist with removing the pistons, I replaced seals and put them back together with no problems. Just make sure surfaces are clean.
Marv
Have disassembled several calipers to assist with removing the pistons, I replaced seals and put them back together with no problems. Just make sure surfaces are clean.
Marv
Geo Hahn
Yoda
Offline
Perhaps this (from the Wayback Machine) will help:
https://web.archive.org/web/20030302163140/www.buckeyetriumphs.org/technical/Brakes/Front/Front.htm
https://web.archive.org/web/20030302163140/www.buckeyetriumphs.org/technical/Brakes/Front/Front.htm