• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR4/4A Tr4a fuel cap o'ring

Share this page

R

Rrbbeerrttoo

Banned
Offline
Has anyone purchased the o'ring fitting under the fuel tank cap. Moss does not carry it and knows not where to locate one. I will appreciate knowing who supplies them.

Robert
66" tr4a irs
CTC 53788 L
 
I've never bothered. But MMC sells all sorts of O-rings, including stock and kits to make your own to any size. That includes square and "double seal" (kind of a smooth X shape) cross-section.
 
I used a spare square o-ring from when I used canister oil filters -- I cut it & shortened it to fit and jammed it in. That seemed adeqaute to do its job. I would think almost any good O-ring of the correct profile could be shortend this way.
 
I used a piece of adhesive backed weatherstip sealing (foam, rectangular shape, cut to length) As I recall Roadster factory does have them, I thought they were pricey for what they were so I did a homebrewed fix with something I had lying around.
 
Thanks guys. Could not find the exact fit but I did use your oil filter o ring idea. Jamming it in was the most work! I had looked for the perfect o ring to keep the car more original, at least with a cheap parts.

Robert
 
Did you ever find this
Are you talking about the fuel filler cap/body ring (see part below) or inside fuel filler cap.
16 680-575 $3.69
GROMMET, gas cap
 
I was speaking of the rubber seal where the fuel cap swings down against. I never solved the problem very well as it still smell fuel when the tank if full. Thanks for your input to my 2012 post!

Robert
 
Back
Top