TR4/4A TR4A Fuel and Brake Line Routing and Dual Exhaust

[CinneaghTR]

I am getting ready to fix the exhaust system problem that I mentioned in a previous post (thanks guys) and feel I need to make sure the fuel and brake lines are in the right places. At the moment, they run to the center of the frame where the exhaust will go. It looks like it will be a tight and hot fit, especially for the fuel line.

Does anyone have pictures of the correct fuel and brake line routes? Moss lists clips and grommets for the fuel line so I am thinking it runs through the frame at some point.

Thanks in advance,
Jeremy

 

[DNK]

This is for the 6 ,maybe similar?

 

[CinneaghTR]

Thanks, DNK.

I found a restoration blog for a 4A and the routing looks about the same from the pictures. Maybe both lines are right beside the exhaust pipe in the center of the frame after all?

 

[DNK]

We're headin to VB in Aug. How bout doing us a favor and bump up the temps by then?

 

[CinneaghTR]

While I am at it, is the fuel line 1/4" or 5/16?

 

[PeterK]

5/16 to the pump and then 1/4 to the carbs.

 

[CinneaghTR]

Thanks, that is a big help!