• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!

    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

TR4/4A TR4A :Anyone have a pic of inner sill in place....

karls59tr

Obi Wan
Bronze
Country flag
Offline
with the floor board removed? ie. a picture taken from inside of a new inner sill installed and ready for the floorboard to go in. Thanks in advance to anyone who took a pic when they did their resto. Karl
 
I have no picture to share only a horror story of a customer who brought me a car to correct after one had been poorly installed.The A pillar wound up sagging down and then the rocker was installed so that the overall out of square was close to one inch!!!
I would suggest jigging up the inner and outer panels with the door set up as it will be when finished.then the floor will make little matter. Bear in mind that the door openings of a 4/6 are influenced a lot by the body shims at the out riggers vs the front or rears,but you have to be in the ball park,NOT the bleachers!!
MD(mad dog)
 
Back
Top