• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR4/4A TR4 / late TR3A Starter Pinion

Share this page

Geo Hahn

Geo Hahn

Yoda
Country flag
Offline
How many teeth are on the pinion on a post-50K TR3A or TR4 starter?

I'm thinking it's 9 or 10.

Casually looking at my 'spare' I see it has 10 and I get the sinking feeling that it is really for a MGTD or such. At least it has the castellated nut on the end that makes a pinion swap fairly simple. Thanks!
 
10 is correct. The pre-50K starter had 9.

Your spare might still be for a MGTD, but at least it has the right number of teeth.
 
Good grief -- no wonder they advise against using the pre-50K starter on a post-50K flywheel. I thought it was just the direction of the bevels.

Nevertheless, that is what I have been doing for the past 30 years (some PO swapped in a late engine but kept the original gearbox so no room for the late starter). Yes, I could get a hi-torque that would be correct and fit but I just enjoy the mystery of it all.
 
Wow, I'm surprised it works for you. A local friend had the same situation without knowing it; and I wound up helping him figure out why the starter was turning but the engine wasn't. It worked the first 30 or 40 times, but eventually started slipping.

That was with a gear drive starter though, so maybe the extra torque was part of the problem.

I assume you realize that the early flywheel will fit a late engine, no problem. Let me know if you are interested, I've got several of them weighing down the ceiling joists in the garage.
 
Thanks for the flywheel offer, I'll keep it in mind. I've been waiting for the clutch or gearbox to have to come out for something else to do something about this mismatch. I don't mind waiting.
 
Back
Top