• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A TR3A Slave Cylinder Mounting?

Share this page

O

oxendine

Jedi Hopeful
Offline
As the title reads does anyone have a good pictures of the slave cylinder and bracket mounted on the engine/transmission?

Thanks, Donnie
 
Here's the one from Practical Hints, which correctly shows the bleed valve on top.
 

Attachments

  • 28336.jpg
    28336.jpg
    48.4 KB · Views: 137
Interesting that that pic also shows the clevis connecting to the bottom hole in the operating arm (am I wrong in thinking that the middle hole is the usual way?).

Sorry about the (now deleted) pic... I grabbed a photo I took of a restoration by a friend who usually knows what he's about.
 
I use whichever hole lines up best with the axis of the slave cylinder. As I recall, that winds up being the bottom hole for me, but I won't swear to it. The workshop manual also shows the bottom hole, but that appears to be the early Lockheed slave, which might be different:
 

Attachments

  • 28337.jpg
    28337.jpg
    63 KB · Views: 127
Back
Top