• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A TR3A front brakes

Share this page

T

TFB

Jedi Knight
Country flag
Offline
I need seals , dust ,covers and crossover pipes.Moss lists Lucas,TRW and aftermarket rubber.Any thoughts on best rubber caliper parts,dot 5 fluid. My calipers were reconditioned but sat for over 10 years with no fluid.Thanks Tom
 
Which ever you use, make sure you put in the stainless pistols, and IMHO the silicone fluid.
Unless you are going to need paint work,then you must forego silicone till its done as it will
wreck the finish.
MD(mad dog)
 
Thanks MD,I am using dot 5 and all was good with my PO rebuilt calipers except one side wouldn't release.They had the SS pistons but a little residue from sitting.I ordered the Moss aftermarket .ThanksTom
 
Back
Top