• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A TR3A Breather Tube Attachment

Share this page

71TR6

71TR6

Jedi Hopeful
Country flag
Offline
Hello All,
I have an engine breather tube and a twisted connecting strap and am trying to figure out how and where this attaches to the engine block. it looks like it might attach to the topside of the oil sump flange but the holes don’t quite line up.

does anyone have an image or description on where this is supposed to attach?

thanks,
Ron
 
I thought I had a photo. The tube goes in the hole in the block just under the fuel pump and the support bolts on to one of the sump bolts. I will get a photo in the morning.

David
 
Yup, I fit the tube into the block but can’t figure out where to bolt it to the block or sump.
 
Hope this helps.

David
Breather tube 2.jpg
 
Thanks David! That helps immensely! I was focused on attaching it on the top since I didn't think it would fit on the underside due to the oil sump stamped flange. Now I see there's a spacer in there to make it work so it makes perfect sense now.

I appreciate you taking the time to snap a picture.

Thanks,
Ron
 
Back
Top