Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
GTP1960
Jedi Knight
Offline
I was able to push the silentblocs out of the steering linkage bush Housing with a gear puller, but the bushings left a lot of rubber behind, (that is real stubborn!).
I don't want to damage the linkage housing by scraping it out. Got suggestions & standard practice on how to proceed from the forum.
Learned that the internal sleeves are part of the silentblocs and must be removed also.
so, per forum advise I scored the sides of the sleeves with an electric jig saw and tapped them out with a punch and hammer. Was pretty easy, once steered in the right direction( no pun intended)
I' m replacing with the delrin pins from TRF.
I don't want to damage the linkage housing by scraping it out. Got suggestions & standard practice on how to proceed from the forum.
Learned that the internal sleeves are part of the silentblocs and must be removed also.
so, per forum advise I scored the sides of the sleeves with an electric jig saw and tapped them out with a punch and hammer. Was pretty easy, once steered in the right direction( no pun intended)
I' m replacing with the delrin pins from TRF.
