• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR2/3/3A TR3 Speedometer Cable length?

Share this page

With or without overdrive?
 
The cable housing on mine, non od, is about 61 inches. Tom
 
angelfj said:
The cable for and OD TR3A is 96 inches.
Click to expand...
Only for LHD. The cable comes out through the firewall in front of the instrument, then turns and runs along the ledge in front of the battery then down along the RH frame member under the car. Big smooth turn there to come up through the teardrop shaped hole around the handbrake and back through the tunnel to go onto the OD. Should be a clip on the battery ledge, and I think another one on the RH frame rail.

You can see (barely) in this shot the original clamp on the ledge, on TS39781LO
 
Back
Top