• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A TR3 rear fender stone-guards

Share this page

To All,
Does anybnody know where to buy the #4 screws for the front fender beading and stone guards for a TR3?​
 
Hello Dave

I presume the #4 screws you are referring to are 1/4" 28 fine thread screws.

You can get them from both Moss and The Roadster factory. Also check Lowes and Home Depot in the special screw bins. They are in bags of 3 or 4 in various lengths.

David
 
The fit on the ones I got from TRF was not as original, but close enough to work with. I have pop rivets into the bottom fold of the fenders. I remembered that the ones on the car I had in the 60s were shiny, so I buffed up the new ones with a rag wheel and rouge. Look pretty good.
Bob
 
Back
Top