• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A TR3 Oil Galley Plug, HELP!!

Share this page

J

Jprmm15

Member
Offline
I dropped off my block to be cleaned to the machine shop. The shop has cleaned the oil galley but in doing so, removed the 2 oil galley plugs. The originals were poured, and I can't find replacements. Thoughts! Any ideas on what I can use?? Thanks!
 
Hi and welcome to the forum. Don't worry - Roadster factory carries them, if you still want the original aluminum - and they are cheap. Or you can substitute a suitable hex plug for them as well, there is an old topic on this forum about this that would give better details, like the size/thread needed etc.
 
I checked the Roadster Factory website and I couldn't find them. You are giving me hope though! I looked for the old post with no luck. Do you have part number for the roadster factory? Thanks so much.
 
Thanks so much for the info. I'll keep everyone posted on my 60 rust bucket that will soon be cruising the streets. You were a life saver!!!
 
Back
Top