• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A TR3 Fuel Gauge Sending Unit

Share this page

C

CaptRoy

Jedi Hopeful
Offline
I ordered a sending unit for my fuel gauge from Moss and when I went to change it tonight I noticed the one on the car had two wires running to it and the new one only had a place for one.

Has anyone changed one out?? Should I call them to verify the right part?? Are they good to work with??

Thanks
 
Hey Roy,
Moss is good to work with, no problem. They are usually pretty knowledgeable about what they sell. Call them...


Bill
 
Re: TR3 Fuel Gauge Sending Unit - Update

I talked with Moss today and the tech support was great.. We resolved the two wire issue and tracked it down to the gauge as it read the same with both sending units. I'm sending the gauge and sending unit off to Mid Valley Instruments to have the gauge rebuile and sending unit calibrated to the gauge.

So why the extra wire you may ask. Seems the PO put rubber insulators on the tank preventing it from being a ground. He wired a ground from the frame..

Thanks for the input...
 
Back
Top