• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A TR3 floor pan to firewall question

Share this page

71TR6

71TR6

Jedi Hopeful
Country flag
Offline
Well, the fun on the TR3 continues in 93deg heat here in PA. I have a new floor pan from TRF and am in the process of fitting it before I completely tear out the sill. The old floor pan was completely rotted so I don't have a good reference on how the floor pan fits to the corner of the firewall and transmission opening. Does the pan flange go inside the firewall sheetmetal corner (as shown in picture) or does it go on the outside?

TR3LeftFloorCorner.jpg

Thanks again for any guidance!

RW
 
Just went out to the shop to look . My car is a 1960 TR3A commission #61324. Your photo has the floor pan attached correctly. The replacement pan is slightly different from original. Frank
 

Attachments

  • IMG_0423.jpg
    IMG_0423.jpg
    48.8 KB · Views: 155
The year makes a difference on that lip. What year are you working on?

Edit...disregard. I was thinking firewall instead of merely the corner
 
Last edited:
Back
Top