Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
doc50
Jedi Trainee
Offline
2 questions for the group:
1) was turning oil pump with a drill motor and there was oil coming out of a hole...turns out there are 3 holes on the left side of the block in a horizontal plane just above the crankcase vent tube. I was able to see that a short 7/16" bolt would screw in there. Is there something that is supposed to attach there?
2) which way am I supposed to turn the oil pump dog? cw or ccw?
Thanks, Thom
1959 TR3
TS34909L (...plus now 'O')!
1) was turning oil pump with a drill motor and there was oil coming out of a hole...turns out there are 3 holes on the left side of the block in a horizontal plane just above the crankcase vent tube. I was able to see that a short 7/16" bolt would screw in there. Is there something that is supposed to attach there?
2) which way am I supposed to turn the oil pump dog? cw or ccw?
Thanks, Thom
1959 TR3
TS34909L (...plus now 'O')!
