• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR2/3/3A TR3 Clutch master and slave bleed issues?

Share this page

K

karls59tr

Yoda
Bronze
Offline
Was there a write up on this forum about Tr3 owners having issues about not being able to get all the air out of the system when doing the clutch bleeding procedure?Something about air being trapped in the master? What was the solution?
 
A new, dry master may need a bit of help to start the bleed. As I recall, just cracking loose the outlet connection was enough to get fluid into the the MC and then close & bleed.
 
Geo Hahn said:
A new, dry master may need a bit of help to start the bleed. As I recall, just cracking loose the outlet connection was enough to get fluid into the the MC and then close & bleed.
Click to expand...

:iagree:

And if that doesn't work, if you have a spare fitting or old line, cut the metal tube short, add a length of vinyl tubing long enough to loop back into the reservoir, and hook that up to the outlet. You can then pump the air out of the master with the activating rod. It might take several strokes, but has always worked for me. Rags under the cylinder to soak up any drips.
 
Back
Top