TR2/3/3A TR3 Bonnet Fastner Kit

[griff]

Ok, I have TRF part number RFK944 (Bonnet Fastener Kit)but I have lost the instruction sheet.

Can someone help me out? The kit consist of Large Phillips head bolt and nut - shorter hex head bolt& nut large flanged washer, smaller sleeves flared on one end(appear to slide through hole in hood.

If you have instruction sheet you can scan and email or fax.

I really wanted to get the hood locked down tonight in preparation for a virgin shake-out run tomorrow.

Thanks Dudes and Dudettes!

GRIFF

 

[NutmegCT]

Griff - I think it's pretty straight forward. Take a look at:

https://www.zeni.net/trf/webcatalog/specials6.22/17.php

Shows the kit dis-assembled.

Hope this helps.
Tom

 

[TR3driver]

This might help, too.
https://www.mossmotors.com/forum/forums/22626/ShowThread.aspx

 

[Don Elliott]

See the instuctions I wrote up. My neighbour has a lathe and he turned the parts for me. It works very nicely.

You might have to "ZOOM" in to read the details, but essentially these are quite close to what Randall found on the Moss Calif. site while mine is from an earlier date and originates from Cox and Buckles in England, now known as Moss Europe.