• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Wedge TR 7 Seats

Share this page

D

DonaldA

Freshman Member
Offline
I am must be a bit of a masochist as I just recently purchased a 1975 TR 7, I have an idea on what I in for having just redone a 1974 TR 6, I am try to remove the seats, they do not seem to fit like a TR 6 seat, any suggestions will be appreciated.
 
You should just be able to slide the seats forward and remove the rear track bolts, then slide the seats back to remove the front bolts and remove the whole assembly. From there, you should be able to remove the top tracks from the seats, if necessary.

The 7s have really comfy seats!
 
Ya, what Sam says. I just took my drivers side seat out and recovered on a new, never broken frame. These seats are comphy for sure.
You may find though, as I did on a parts car 7 I had, that the rails have rusted right to the floor. That is a PITA.
Good luck, and enjoy the 7.

Paul
 
Back
Top