• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR 4 Timing mark

Share this page

C

carpecursusII

Jedi Trainee
Country flag
Offline
glemon said:
Yikes, been so many years, geometry, pulley is 5.5" I assume this is diameter, circumference is Pi x diameter, so 3.14 x 5.5" = 17.27" (circumference) / 360 (degrees) = .048" per degree (rounded). Times 4 (degrees) = .192" inches, a hair over 3/16" of an inch. Correct?
Click to expand...
 
Back
Top