Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
For sale here is a cylinder head for a TR 2, TR 3, TR 3A, TR 3B or early TR 4.
This is a high port head and it does not have the cut-away as the TR 4A heads had.
I do not find any numbers stamped on this head, so I have no idea what year or model it came from.
This head has new valves and new valve guides. It's in very good condition, but needs a little cleaning up.
The head was mic'd and it measured 3.285, with 3.30 as the original.
Asking price is $600 (or best offer), plus shipping which could vary from $50 to $80 depending on how far it needs to go.
This is a high port head and it does not have the cut-away as the TR 4A heads had.
I do not find any numbers stamped on this head, so I have no idea what year or model it came from.
This head has new valves and new valve guides. It's in very good condition, but needs a little cleaning up.
The head was mic'd and it measured 3.285, with 3.30 as the original.
Asking price is $600 (or best offer), plus shipping which could vary from $50 to $80 depending on how far it needs to go.