Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
tahoe healey
Yoda
Offline
I have an old Craftsman bar torque wrench and a new Harbor Freight "click" wrench. They read different. I tend to want to trust the Craftsman with no moving parts. Is there a way I can test them?
TH
TH
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
torque wrenchs
- Thread starter tahoe healey
- Start date
Share this page
TR3driver
Great Pumpkin - R.I.P
Offline
Sure, apply a known torque. Easiest way to do that is to clamp the drive in a vise with the handle horizontal, and hang a known weight from the handle. The weight you use, times the distance from the weight to the drive, is the applied torque.
In theory you should compensate for the weight of the handle, but it's not enough to worry about as long as you check at a fair amount of torque.
In theory you should compensate for the weight of the handle, but it's not enough to worry about as long as you check at a fair amount of torque.