Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
When I get together with other TR6 owners, I grab the bumpers and push down and up. Other 6's move up and down about at least 2 inches. Not mine. I have about 1/2 inch of suspension travel, front and rear, if that. Rides like an old Morgan. Dead springs? What else could it be?
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
TR6 tight suspension
- Thread starter pdplot
- Start date
Share this page
TR3driver
Great Pumpkin - R.I.P
Offline
My first thought is that someone has "upgraded" the springs. Lots of folks object to the relatively soft stock ride of a TR6, and install stiffer "competition" springs.
Could be binding pivots or a very unusual failure of the shocks, but I would look at springs first. Also check the bump and rebound stops while you're under there. Should be roughly equal clearance with the weight of the car on the suspension, but ill-considered changes (or sagging springs) may have changed that.
Could be binding pivots or a very unusual failure of the shocks, but I would look at springs first. Also check the bump and rebound stops while you're under there. Should be roughly equal clearance with the weight of the car on the suspension, but ill-considered changes (or sagging springs) may have changed that.
Only thing I know is that one PO bought a front spring from TRF in 1986. Invoice says "stock grade". Price - $32.50.Why only one? Who knows. I have a rear tube shock conversion but it was tight even before that. I believe the other 3 springs are original to the car, as are the front lever shocks. How can I tell if the springs are shot? Is there a test?
