• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

that didnt work

Share this page

Nice dash!
 
so where did you get the carbon fiber panels and how much are they also is that a grant wheel? what hub did you use, I really need to know

[ 12-16-2003: Message edited by: Chuck Cougill ]</p>
 
I fot the carbon fibre from Fibre Images in Lancaster Calif - they do all the race car tubs and stuff like that - I got a piece the size of a door for 150 bucks. It is really easy to work with - I have about half of it left. The steering wheel is a Sparco II using a Sparco hub. I also have Sparco racing seats and harness installed. Anyone who would like a set of the carbon fibre inserts let me know and I will be glad to build you a set.
 
I just spent some time on the shadtreemg site - I think its great. Especially liked the story of the B and the story of Laura and her Detroit iron. She sounds like my wife, who by the way painted my car to a show quality finish as witnessed by all who view the B at the car shows. They have a hard time believing that a lady 5'1" and 97 lbs could do such a fine job. I wish more ladies would turn gearhead - we could use thier support. Especially around Christmas and birthday times.
 
chuck does have the 4th best MG site on the web, doesn't he? (course we all KNOW this site, skye's site & www.theautoist.com are 1, 2, & 3 respectively, don't we?}

[ 12-16-2003: Message edited by: tony barnhill ]</p>
 
I'd be very happy to be fourth Tony. Remember I may soon have a guest author (unnamed) who might help make it worthy
lol.gif
and Laura is gonna take painting school next fall

[ 12-16-2003: Message edited by: Chuck Cougill ]</p>
 
I really didn't know anybody was having a competition so I have never looked at them that way!! I do know that I really do like Chucks!!!! I still wonder how he has time for it because he must work 70 hrs a lot of weeks!!!! Anyway, as far as I am concerned, good job Basil, Skye, Tony and Chuck!!! Actually, you guys have great sights and all work lots of hours!!! A tip of the hat to you all!!!!!!
cheers.gif
 
I don't have time for it and it wouldn't be there except for the great contributors, and I am at work right now
confused.gif


[ 12-18-2003: Message edited by: Chuck Cougill ]</p>
 
Nice site adam...if the lens aren't cracked, I'll take the taillights & the auto choke...email me & let me know how I can pay you
 
well... the lens do have 1 crack in each of them right in front of the top light but the base is still good(not all rusty). and the auto choke has a water inlet and a water outlet and one of those got cracked off lol. buf you could jb weld it on or i would even do it for you. I aslo have the old choke body that i got from you(i got everything i needed and put it back togeather with what i didnt need from mine, nothing missing from it) and I also have the choke i got from VB still works fine just a little dirty. tony has first dibs on this stuff. then it is all open for grabs. i just took pictures of everything and will post on classifieds with pics when i download them off my camera(about an hour or so)
 
Adam...don't see anything there I absolutely need...
 
Back
Top