• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

temperature sending units

Share this page

beebopbogo

beebopbogo

Member
Offline
hey all,

I just put a 1972 cylinder head into my 1979 MGB. Since both years use different temperature sending units, which should I use? One is color-coded red, the other color-coded blue. What's the difference?
 
I would say use the one from your '79 as it matches the meter installed in your car. It's probably a difference in resistance and maybe a linearity difference up the scale. They would probably both work, just they would read different. You could try both and see if there is any difference. They are just temperature sensitive resistors. "Thermistors"
If you have an ohm meter, you could measure the two to see if there is any difference in resistance.
Bob
 
I agree but, if you want the ohm meter test to be meaningful, you need to heat them in the same water bath while reading them to ensure that the reading are truly the same.
That said, the odds are that they are more likely to read the same at high temperature and be different at "normal" temperatures.

Mike
 
Back
Top