• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Temp gauge grommet

Share this page

D

dezand

Senior Member
Country flag
Offline
Is it possible to replace the firewall grommet on the temperature sender capilary tube by pushing over the sensor end?
Thanks
 
If the grommet is the right size for the hole in the firewall, just cut the grommet through with a razor blade and fit it into the hole. It should mate well with the hole, and it's much easier than wrangling it over the wiring, etc.

That is, IF I understand your question correctly. . .
 
Thanks for that tip. That seems the simplest way to do it. The hole in the grommet is so small compared to the sensor end, it would be tough getting the grommet over it without ruining it.
 
Back
Top