• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR6 SU HS6 question

Share this page

It kind of hard to measure it with the carbs and linkage in place, but the connecting rods should be about 1/2" longer than the distance between the nuts on the end of the throttle shaft and the choke shaft or bolt. Hope that is clear.
Berry
 
Back
Top