Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
MGTF1250Dave
Jedi Knight
Offline
Aloha All,
The float bowl mounting bolt on one of my H6 SU carb has worn threads. I am trying dress up the threads, but before I do I want to identify the size and thread pattern for both the bolt and the hole carb body. It would appear to be either 7/16 inch or 11 mm. The thread pattern seems to be about 16 per inch which is not a standard 7/16 size (14 TPI coarse and 20 TPI fine). In metric 11 x 1.5 would seem closer since 1.5 converts to about 17 TPI. Does anyone know what size bolt is specified?
Mahalo
The float bowl mounting bolt on one of my H6 SU carb has worn threads. I am trying dress up the threads, but before I do I want to identify the size and thread pattern for both the bolt and the hole carb body. It would appear to be either 7/16 inch or 11 mm. The thread pattern seems to be about 16 per inch which is not a standard 7/16 size (14 TPI coarse and 20 TPI fine). In metric 11 x 1.5 would seem closer since 1.5 converts to about 17 TPI. Does anyone know what size bolt is specified?
Mahalo
