Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Have installed new and correct points, condensor and rotor on my 76B dizzy, I decided to pull the dizzy out of the car and go through it. It was quite dirty and rusty. The PO installed the wrong wire from the dizzy to the coil, instead of having the plastic rectangular piece that fills in the hole in the side of the dizzy(25D type)all kinds of crap worked its way inside over the years with just the wire going through the opening. I noticed after cleaning and reasembling everything when I sping the drive gear I can hear the wieghts moving, is this OK or is something amiss? I'm hoping it is OK and the reason I didn't hear it before was because they weren't moving from all the dirt. Thanks, Mack /ubbthreads/images/graemlins/cheers.gif
-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Still in asytole but ready for the paddles- clear
- Thread starter Mack
- Start date
