Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
healeyneil
Jedi Hopeful
Offline
A friend has one sticking back brake on his BJ8. Other back brake is fine. So far we have replaced the flexy hose, rebuilt the wheel cylinder, replaced the metal pipe from the 3 way junction to the offending wheel cylinder, replaced the shoes and the pulloff springs. We have disconnected the handbrake at that side to ensure that is not causing problems.
All the above have been done at seperate visits ( that is, not all at once) The cylinder appears to move OK in the backplate. Any further suggestions ?
For what it may be worth, he had a splined adaptor come loose on this side a few months ago, which resulted in a new adaptor, hub and bearing being required.
All the above have been done at seperate visits ( that is, not all at once) The cylinder appears to move OK in the backplate. Any further suggestions ?
For what it may be worth, he had a splined adaptor come loose on this side a few months ago, which resulted in a new adaptor, hub and bearing being required.