• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

steering wheel restoration

Share this page

Well, that isn't what I wanted. I clicked on the fourth icon to enter a picture, but didn't get a text box to enter the link after I selected non-floating image. So, just the link appears. Darn it.
Dennis
 
I got a picture of the wheel, but it's kind of small. I would like to see what you did.
 
On PhotoBucket, click in the area labeled "IMG Code":
untitled.jpg


Then switch to your BCF page, and paste the link into your post. You will see something like:
<div class="ubbcode-block"><div class="ubbcode-header">Code:</div><div class="ubbcode-body ubbcode-pre" ><pre>
DSCF0008dimmed.jpg
</pre>[/QUOTE]
but after you submit the post (or preview it), it will show up as the picture:

DSCF0008dimmed.jpg
 
Thanks Randall! So here we go:Pictured below is the result of an elaborate project to save an original steering wheel that had a loose covering and rust spiderwebs under the plating, particularly in the spoke cutouts and on the back side. For those who have not inspected their steering wheel closely, I can tell you that the original steering wheel cover is rubber, not leather. The original molding resulted in a slightly foam inner with a molded leather-look exterior, complete with simulated stitching. I will start at the beginning on another post to describe the process I went through, and will advise you of the pitfalls I encountered along the way.
-Dennis

steeringwheelcompleted.jpg
 
Back
Top