• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.

    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR5/TR250 Steering Rack Fitment/Geometry Theory Assistance Required.

malbaby

Jedi Warrior
Country flag
Offline
Is the factory position of the steering rack ideal on a TR5-6, or can it be improved on?
EG...if I was to draw a straight line across between the steering arm/tie rod ends with the car sitting at my preferred ride height, what is the ideal rack position.
Higher/lower...forward/back from the line, keeping in mind possible bump steer.
 
Last edited:
I would check with RevingtonTR. I used their kit on my TR3, and if anyone knows the answer for your set up, it’s them.
Jim
TS44743L”O”
 
Back
Top