Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Offline
There are quite a few shims under the fillcover on my steering rack, When I redid the boots, as per forum recommendations, I removed the thinest shim. It still seems like a lot of play.
2 quick Q's.
1 - How do I know that I need them all?
2 - How do I adjust correctly?
3 - How much wear is acceptable on the small copper bushing that is inside the rack?
I have removed most of the play in the front end mainly by filling the rack & the almost empty front shock, and by replacing the sway bar bushings.
It's seemingly nice & tight for a 39 year old.
2 quick Q's.
1 - How do I know that I need them all?
2 - How do I adjust correctly?
3 - How much wear is acceptable on the small copper bushing that is inside the rack?
I have removed most of the play in the front end mainly by filling the rack & the almost empty front shock, and by replacing the sway bar bushings.
It's seemingly nice & tight for a 39 year old.
