• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!

    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Steering box BJ8

barnman

Senior Member
Country flag
Offline
Good afternoon, anybody any idea how much lubricant the steering box and idler hold.
I am rebuilding the box and need to buy an appropriate amount.
Thanks in anticipation.
 
A quart/liter should do it; a pint won't. If you're buying Penrite, 2 bottles.

When you're filling the steering box, be sure to turn the steering wheel lock to lock a few times so it settles in properly - otherwise it will appear as full when it's only half full.

I found it convenient to heat up the grease in the microwave, then use a turkey baster to inject it into the box.
 
If you're using corn head grease then its a cartridge and a half or thereabouts .
 
Last edited by a moderator:
If you're using corn head grease then its a cartridge and a half or thereabouts .

The John Deere Corn Head grease is easiest to install with a gun with a flex hose and grease injector needle. The needle probes down into the box so you're filling it up from the bottom up.

Installing from a squeeze bottle such as Penrite is more difficult because the grease tends to collect at the top and overflow out the hole.

Be sure to turn the steering wheel such that the box's internal arm is out of the way of the hole or it'll tend to block the filling, causing overflow.
 
Back
Top