• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR6 Steering boot clamp wire - why?

Share this page

steveg

steveg

Yoda
Gold
Country flag
Offline
I'm getting ready to replace the steering boots and am curious why the driver's side inboard uses wire instead of a clamp. Seems kind of half-a**ed.

Assuming the clamping area is too narrow for a screw clamp. Can one use a zip-tie instead?
 
If you can get it tight - why not? It won't rust, but it would have to be cut off with a hacksaw blade to change out boot.
 
MONEY would be first guess twist on twist off. Zip tie works well and in 10 years what ever won't rust. black on black never to be touched again. Madflyer
 
Back
Top