• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR6 Steering boot clamp wire - why?

Share this page

steveg

steveg

Yoda
Gold
Country flag
Offline
I'm getting ready to replace the steering boots and am curious why the driver's side inboard uses wire instead of a clamp. Seems kind of half-a**ed.

Assuming the clamping area is too narrow for a screw clamp. Can one use a zip-tie instead?
 
If you can get it tight - why not? It won't rust, but it would have to be cut off with a hacksaw blade to change out boot.
 
MONEY would be first guess twist on twist off. Zip tie works well and in 10 years what ever won't rust. black on black never to be touched again. Madflyer
 
Back
Top