• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

T-Series starter motor

Share this page

S

saltiga

Senior Member
Country flag
Offline
Hello all, what is the allowable end play for the armature on a td starter motor, mine has about 1/8 inch, thanks saltiga
 
Since nobody answered , I've noticed all that type of starter has quite a bit of end play and 1/8 " doesn't seem too much. Just light oil on the gear and shaft , no grease.
 
Brinkerhoff said:
Since nobody answered , I've noticed all that type of starter has quite a bit of end play and 1/8 " doesn't seem too much. Just light oil on the gear and shaft , no grease.
Click to expand...

Thank you, That's the info I was looking for. :encouragement: PJ
 
Back
Top